Firmware And Hard Boot Uploads - Martin Mania EFX500 User Manual

F i r m w a r e a n d h a r d b o o t u p l o a d s
It is possible to upload new firmware to via the data IN connector using, for
example, an uploader such as the Martin MP-2 Uploader, or a PC using a
Martin DABS interface device and suitable software. The latest firmware
versions for Mania EFX fixtures can be downloaded from the Support area
of the Martin website at http://www.martin.com
If a fixture will not accept normal firmware uploads, it can be forced to
accept an upload by starting it in hard boot mode. To start in hard boot
mode, hold both the [Mode] button and the [X100] button pressed in while
powering on the fixture. When the fixture is in hard boot mode, the data
LED blinks.
If you are not sure how to carry out uploads, your Martin dealer will be
able to give advice or carry out the upload for you.
32 Mania EFX user manual