Overview Of Imaging Parameters - Point Grey Flea3 GigE Technical Reference

Point Grey Flea3 GigE Technical Reference
8.6

Overview of Imaging Parameters

The camera supports control over the following imaging parameters:
Imaging Parameter
Brightness
Shutter Time
Gain
Auto Exposure
Sharpness
Gamma and Lookup
Table
Image Flip/Mirror
Embedded Image
Information
White Balance (color
models only)
Bayer Color Processing
(color models only)
Hue (color models only)
Saturation (color
models only)
Most of these imaging parameters are defined by modes and values.
There are three modes:
GenICam Control
Mode
Off Feature is in manual mode and values can be set
Continuous Feature is in automatic mode and values cannot be set
Once Feature executes once automatically and then returns to manual mode
Users can define the values for manual operation of a feature.
Revised 10/29/2013
Copyright ©2010-2013 Point Grey Research Inc.
GenICam Feature
Analog Control Setting Brightness Using the FlyCapture API
Acquisition Control Setting Shutter Using the FlyCapture API
Analog Control Setting Gain Using the FlyCapture API
Acquisition Control Setting Auto Exposure Using the FlyCapture API
Analog Control Setting Sharpness Using the FlyCapture API
Analog Control Setting Gamma Using the FlyCapture API
CSR control: LUT: 80000h
– 80048h
Image Format Control
CSR control: FRAME_
INFO: 12F8h
Analog Control Setting White Balance Using the FlyCapture API
Image Format Control Accessing Raw Bayer Data using FlyCapture
Analog Control Setting Hue Using the FlyCapture API
Analog Control Setting Saturation Using the FlyCapture API
Description
The term Continuous is the same as Auto and the term Once is the same as One Push.
FlyCapture API Sample Code
8 Flea3 GigE Attributes
70