Digital Input Output Control - Point Grey Flea3 GigE Technical Reference

Point Grey Flea3 GigE Technical Reference
Name
AcquisitionFrameRateControlEnabled
FrameRateAuto
TriggerSelector
TriggerMode
TriggerSource
TriggerActivation
TriggerDelay
TriggerDelayEnabled
ExposureMode
ExposureTime
ExposureAuto
C.5

Digital Input Output Control

Name
LineSelector
LineMode
LineSource
Revised 10/29/2013
Copyright ©2010-2013 Point Grey Research Inc.
Display Name
Acquisition Frame Rate
Control Enabled
Frame Rate Auto
Trigger Selector
Trigger Mode
Trigger Source
Trigger Activation
TriggerDelay (us)
Trigger Delay Enabled
Exposure Mode
(not all models support all
modes)
ExposureTime (us)
Exposure Auto
Display Name
Selects the physical line (or GPIO pin) of the
+ Line Selector
external device connector to configure.
Controls whether the physical line is used to Input
Line Mode or Output a signal. Choices are dependent on which
line is selected.
Selects which input or output signal to output on
Line Source
the selected line. Line Mode must be Output.
Description
Enables manual control of the
camera frame rate
Controls the mode for automatic
frame rate adjustment
Selects the type of trigger to
configure. Derived from Exposure
Mode.
Controls whether or not the
selected trigger is active
Specifies the internal signal or
physical input line to use as the
trigger source. The selected
trigger must have its Trigger
Mode set to On.
Specifies the activation mode of
the trigger
Specifies the delay (in
microseconds) to apply after the
trigger reception before activating
it
Specifies whether or not the
Trigger Delay is enabled
Sets the operation mode of the
exposure (shutter). Toggles the
Trigger Selector. Timed =
Exposure Start; Trigger Width =
Exposure Active
Exposure time in microseconds
when Exposure Mode is Timed
Sets the automatic exposure
mode when Exposure mode is
Timed
Description
C GenICam Features
Value
True
False
Off
Continuous
Exposure Start/
Exposure Active
Off
On
Software
Line x where x is a
GPIO trigger pin
Falling Edge
Rising Edge
True
False
Timed
Trigger Width
Off
Once
Continuous
Value
Line 0
Line 1
Line 2
Line 3
Input
Trigger
Strobe
Output
Exposure Active
External Trigger Active
103