Point Grey Flea3 GigE Technical Reference page 50

Point Grey Flea3 GigE Technical Reference
Name
FrameRateAuto
TriggerSelector
TriggerMode
TriggerSource
TriggerActivation
TriggerDelay
TriggerDelayEnabled
ExposureMode
ExposureTime
ExposureAuto
Revised 10/29/2013
Copyright ©2010-2013 Point Grey Research Inc.
Display Name
Frame Rate Auto
Trigger Selector
Trigger Mode
Trigger Source
Trigger Activation
TriggerDelay (us)
Trigger Delay Enabled
Exposure Mode
(not all models support all
modes)
ExposureTime (us)
Exposure Auto
Description
Controls the mode for automatic
frame rate adjustment
Selects the type of trigger to
configure. Derived from Exposure
Mode.
Controls whether or not the
selected trigger is active
Specifies the internal signal or
physical input line to use as the
trigger source. The selected
trigger must have its Trigger
Mode set to On.
Specifies the activation mode of
the trigger
Specifies the delay (in
microseconds) to apply after the
trigger reception before activating
it
Specifies whether or not the
Trigger Delay is enabled
Sets the operation mode of the
exposure (shutter). Toggles the
Trigger Selector. Timed =
Exposure Start; Trigger Width =
Exposure Active
Exposure time in microseconds
when Exposure Mode is Timed
Sets the automatic exposure
mode when Exposure mode is
Timed
7 Image Acquisition
Value
Off
Continuous
Exposure Start/
Exposure Active
Off
On
Software
Line x where x is a
GPIO trigger pin
Falling Edge
Rising Edge
True
False
Timed
Trigger Width
Off
Once
Continuous
40