Point Grey Flea3 GigE Technical Reference page 66

Point Grey Flea3 GigE Technical Reference
is performed after color processing. Although image quality may be poorer than in Mode 5, a frame rate increase is
possible in this mode.
Mode 7
Mode 7 allows only for specifying a region of interest, and does not perform any binning. This mode uses a slower pixel
clock, and is recommended for longer extended shutter times and/or improved imaging performance. There may be no
frame rate increase when ROI size is reduced.
Revised 10/29/2013
Copyright ©2010-2013 Point Grey Research Inc.
8 Flea3 GigE Attributes
56