Hue; Saturation - Point Grey Flea3 GigE Technical Reference

Point Grey Flea3 GigE Technical Reference
To control Bayer color processing:
GenICam—Image Format Control
n
FlyCapture
n
Accessing Raw Bayer Data
The actual physical arrangement of the red, green and blue "pixels" for a given camera is determined by the
arrangement of the color filter array on the imaging sensor itself. The format, or order, in which this raw color data is
streamed out, however, depends on the specific camera model and firmware version.
Related Knowledge Base Articles
Different color processing algorithms
Writing color processing software and color interpolation
algorithms
How is color processing performed on my camera's images?

8.19 Hue

Hue is applicable to color models only.
This provides a mechanism to control the Hue component of the images being produced by the Flea3 GigE, given a
standard Hue, Saturation, Value (HSV) color space.
To adjust hue use:
GenICam—Analog Control
n
FlyCapture
n

8.20 Saturation

Saturation is applicable to color models only.
This provides a mechanism to control the Saturation component of the images being produced by the Flea3 GigE, given
a standard Hue, Saturation, Value (HSV) color space.
Saturation in this context does not refer to the saturation of a sensor charge.
To adjust saturation use:
GenICam—Analog Control
n
FlyCapture
n
Revised 10/29/2013
Copyright ©2010-2013 Point Grey Research Inc.
API—Accessing Raw Bayer Data using FlyCapture
Title
API—Setting Hue Using the FlyCapture API
API—Setting Saturation Using the FlyCapture API
Article
Knowledge Base Article 33
Knowledge Base Article 37
Knowledge Base Article 89
8 Flea3 GigE Attributes
81