Camera Interface And Connectors; Ethernet Connector; Interface Cables; Interface Card - Point Grey Flea3 GigE Technical Reference

Gige digital camera
Hide thumbs Also See for Flea3 GigE:
Table of Contents

Advertisement

Point Grey Flea3 GigE Technical Reference
4.7

Camera Interface and Connectors

4.7.1

Ethernet Connector

The 8-pin RJ-45 Ethernet jack is equipped with two (2) M2 screwholes for secure connection. Pin assignments conform
to the Ethernet standard.
4.7.2

Interface Cables

Category 5e or 6 cables up to 100 meters in length should be used for connecting the camera to the network interface
card on the host system. Point Grey sells a 5-meter Category 5e cable for this purpose.
To purchase a recommended cable from Point Grey, visit the
4.7.3

Interface Card

The camera must connect to an interface card. This is sometimes called a host adapter, a bus controller, or a network
interface card (NIC).
A 1000 BASE-T NIC is recommended for streaming images on the Ethernet network between the camera and host
system.)
For optimal video streaming and camera control performance, we
recommend an Intel Pro chipset on a PCIe interface.
To purchase a compatible card from Point Grey, visit the
4.7.4

General Purpose Input/Output (GPIO)

The camera has an 8-pin GPIO connector on the back of the case; refer to the diagram below for wire color-coding. The
connector is a Hirose HR25 8 pin connector with part number: HR25-7TR-8SA. The male connector is part number:
HR25-7TP-8P.
Diagram
For more information on camera power, see
For more information on configuring input/output with GPIO, see
Revised 10/29/2013
Copyright ©2010-2013 Point Grey Research Inc.
Color
Pin
Function
Black
1
I0
White
2
O1
Red
3
IO2
Green
4
IO3
Brown
5
GND
Blue
6
OPTO_GND
Orange
7
V
EXT
Yellow
8
+3.3 V
Powering the
Point Grey Webstore
or the
Point Grey Webstore
or the
Description
Opto-isolated input (default Trigger in)
Opto-isolated output
Input/Output/serial transmit (TX)
Input/Output/serial receive (RX)
Ground for bi-directional IO, V
Ground for opto-isolated IO pins
Allows the camera to be powered externally
Power external circuitry up to 150 mA
Camera.
Input/Output
Control.
4 Flea3 GigE Physical Interface
Products Accessories
page.
Products Accessories
page.
, +3.3 V pins
EXT
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents