Point Grey Flea3 GigE Technical Reference
8.8
Brightness
Brightness, also known as offset or black level, controls the level of black in an image.
The camera supports brightness control.
To adjust brightness:
GenICam—Analog Control
n
FlyCapture
n
8.9
Shutter Time
The Flea3 GigE supports Automatic, Manual, and One Push control of the image sensor shutter time.
Shutter times are scaled by the divider of the basic frame rate. For example, dividing the frame rate by two (e.g. 15 FPS
to 7.5 FPS) causes the maximum shutter time to double (e.g. 66 ms to 133 ms).
The maximum shutter time can be extended beyond the normal range by disabling the frame rate. Once the frame rate
is disabled, you should see the maximum value of the shutter time increase.
The supported shutter time range is:
Revised 10/29/2013
Copyright ©2010-2013 Point Grey Research Inc.
API—Setting Brightness Using the FlyCapture API
Model
FL3-GE-03S1M-C
FL3-GE-03S1C-C
FL3-GE-03S2M-C
FL3-GE-03S2C-C
FL3-GE-08S2M-C
FL3-GE-08S2C-C
FL3-GE-13S2M-C
FL3-GE-13S2C-C
FL3-GE-14S3M-C
FL3-GE-14S3C-C
FL3-GE-20S4M-C
FL3-GE-20S4C-C
FL3-GE-28S4M-C
FL3-GE-28S4C-C
FL3-GE-50S5M-C
FL3-GE-50S5C-C
The maximum shutter time may only be available when operating the camera in
Format 7 Mode 7. For more information, see
Range
0.03 ms to 32 seconds
0.03 ms to 32 seconds
0.03 ms to 32 seconds
0.03 ms to 32 seconds
0.03 ms to 32 seconds
0.03 ms to 32 seconds
0.03 ms to 32 seconds
0.03 ms to 32 seconds
0.03 ms to 32 seconds
0.03 ms to 32 seconds
0.03 ms to 32 seconds
0.03 ms to 32 seconds
0.03 ms to 32 seconds
0.03 ms to 32 seconds
0.03 ms to 32 seconds
0.03 ms to 32 seconds
Video Modes
Overview.
8 Flea3 GigE Attributes
72