Point Grey Flea3 GigE Technical Reference page 12

Point Grey Flea3 GigE Technical Reference
Image Data Formats
Partial Image Modes
Image Processing
Shutter
Gain
Gamma
White Balance
High Dynamic Range
Color Processing
Digital Interface
Transfer Rates
GPIO
External Trigger Modes
Synchronization
Image Buffer
Memory Channels
Flash Memory
Dimensions
Mass
Power Consumption
Machine Vision Standard
Camera Control
Camera Updates
Lens Mount
Temperature
Compliance
Operating System
Warranty
Revised 10/29/2013
Copyright ©2010-2013 Point Grey Research Inc.
Y8, Y16, Mono8, Mono12, Mono16, Raw8, Raw12, Raw16 (all models); RGB, YUV411,
YUV422, YUV 444 (color models)
Pixel binning and region of interest (ROI) modes
Gamma, lookup table, hue, saturation, and sharpness
Global Shutter; Automatic/manual/one-push/extended shutter modes
0.03 ms to 32 seconds
Automatic/manual/one-push modes
0 dB to 24 dB
0.50 to 4.00, programmable lookup table
Automatic/manual/one-push modes
Cycle 4 gain and exposure presets
On-camera in YUV or RGB format, or on-PC in Raw format
Gigabit Ethernet interface with screw locks for camera control and data
10/100/1000 Mbit/s
8-pin Hirose HR25 GPIO connector for power, trigger, strobe, PWM, and serial I/O, 1
opto-isolated input, 1 opto-isolated output, 2 bi-directional I/O pins
Trigger Modes 0, 1, 3, 4, 5, 13 (FL3-GE-13S2 only), 14 and 15
Via external trigger or software trigger
32 MB frame buffer
2 memory channels for custom camera settings
1 MB non-volatile memory
29 mm x 29 mm x 30 mm excluding lens holder, without optics (metal case)
38 grams (without optics)
12-24 V, <2.5 W, via GPIO
GigE Vision v1.2
via FlyCapture SDK, or GigE Vision third party software
In-field firmware updates
C-mount (FL3-GE-13S2 also available with CS-mount)
Operating: 0° to 45°C; Storage: -30° to 60°C
CE, FCC, RoHS
Windows 7, Linux Ubuntu
3 years
All Flea3 GigE Models
1 Flea3 GigE Specifications
2