Imaging Parameters And Control; Overview Of Imaging Parameters - Point Grey Flea3 FL3-U3 Technical Reference Manual

Point Grey Flea3 USB 3.0 Technical Reference
7

Imaging Parameters and Control

7.1

Overview of Imaging Parameters

The camera supports control over the following imaging parameters:
Imaging
Parameter
Brightness
Gain
Saturation (color
models only)
Hue (color models
only)
Sharpness
Gamma
Lookup Table
White Balance (color
models only)
Shutter
Bayer Color Processing
(color models only)
Image Mirror/Flip
Embedded Image
Information
Most of these imaging parameters are defined by modes and values.
There are three modes:
Mode
On/Off
Auto/Manual
One Push
Revised 9/27/2012
Copyright ©2011-2012 Point Grey Research Inc.
More
Information
page 95 BRIGHTNESS: 800h on next page
page 96 GAIN: 820h on page 97
page 98 SATURATION: 814h on page 98
page 100 HUE: 810h on page 100
page 101 SHARPNESS: 808h on page 102
page 103 GAMMA: 818h on page 105
LUT: 80000h – 80048h (IIDC 1.32) on
page 103
page 106
page 109 WHITE_BALANCE: 80Ch on page 110
page 111 SHUTTER: 81Ch on page 112
BAYER_TILE_MAPPING: 1040h on page
page 117
118
MIRROR_IMAGE_CTRL: 1054h on page
page 119
119
page 119 FRAME_INFO: 12F8h on page 120
Determines if the feature is on. If off, values are fixed and not controllable.
If the feature is on, determines if the feature is in automatic or manual mode. If
manual, values can be set.
If the feature is in manual mode, the camera executes once automatically and
then returns to manual mode.
Register Control
Description
7 Imaging Parameters and Control
FlyCapture API Examples
Example: Setting Brightness Using
the FlyCapture API on page 96
Example: Setting Gain Using the
FlyCapture API on page 98
Example: Setting Saturation Using
the FlyCapture API on page 99
Example: Setting Sharpness Using
the FlyCapture API on page 103
Example: Setting Gamma Using the
FlyCapture API on page 106
Example: Setting White Balance
Using the FlyCapture API on page
110
Example: Accessing Raw Bayer
Data using FlyCapture2 on page 118
94