Receiving A Call; Hands Free - Geemarc PhotoDECT User Manual

USING THE TELEPHONE

Receiving a Call

When an incoming call is received the telephone rings. If the
caller can be identified (due to subscription to a Caller ID service),
the caller's telephone number will be displayed. If this caller's
number is stored on the Phonebook, the associated name will be
displayed.
If auto answer is activated, simply lift the handset out of
To end the call simply press
Call duration is always displayed once you hang up.
Note: You can alter the ringer volume whilst the telephone is
ringing. Simply use

Hands Free

You can turn on the speakerphone built into the handset either
before or during a call. In this mode there is no need to hold the
handset. You will hear the third party through the speaker and
the microphone will pick up your voice.
Before making a call, press
The icon will be displayed on the LCD.
Press during a call to turn hands free on. The
will be displayed on the LCD.
Press again during a call to turn hands free off. The
icon will disappear from the LCD.
Note: To adjust the speakerphone volume use Audio Setup in
Handset Settings.
Press .to answer
Or
the base
on the base
and
twice to turn hands free on.
39
or replace the handset
to select the desired volume.
icon