Call Switching; Receiving A Call - Geemarc AmpliDECT400BT User Manual

USING THE TELEPHONE

Call Switching

You can switch between the handset and the Bluetooth
headset during a call (the handset must be paired and
connected to the Bluetooth headset).
During a call using the handset, press , the call will
switch to the Bluetooth headset.
During a call using the Bluetooth headset, press ,
the call will switch to the handset.

Receiving a Call

When an incoming call is received the telephone rings
and the icon will flash on the LCD display. If the
caller can be identified (due to subscription to a Caller
Display service), the caller's telephone number will be
displayed.
'NEW CALL'
If the caller cannot be identified, will be
'MSG WTG
displayed. If you have a voice message,
ON'
and icon will be shown on the LCD.
Press to answer a call through the handset
or , to answer the call through a connected
Bluetooth headset
If auto answer activated, when the handset is in the
49