Geemarc AMPLIDECT 295 - Cordless Telephone Quick User Manual

CONNECTION

Connection base

Connection additional handset (Option)

Please check Geemarc.com website to get the detailed User instruction manual

PACKAGE CONTENTS

1 Telephone base, 1 cordless Handset, 1 power adapter, 1 Telephone line cord, 1 NiMh battery pack, 1 Quick user guide.

INSTALLATION

Connecting the telephone

Connect the telephone cable to the telephone line socket (A) and to the telephone wall socket (B).

Connect the power adapter jack to base (and DC charger) (C) then connect the power adapter plug in mains power (D).

Note: Use only the power adapters supplied with the phone.

Connecting the battery

Plug the battery connector securely into the socket inside the handset battery compartment.

Insert the supplied battery as indicated.

Align the cover flat against the battery compartment, and then slide it upwards until it clicks into place.

Charging the batteries

Charge the batteries for at least 12 hours when charging for the first time.

OVERVIEW

Base

1. /HANDSET LOCATOR
   While the phone is idle, press to page all handsets.
2. IN USE
   ON when handsets are in use, or when the answering system is answering an incoming call.
   ON when a handset is being registered.
   Flashes when there is an incoming call or when handsets are being deregistered.
   Flashes when another telephone is in use on the same line.
3. MESSAGE COUNTER
   Flashes when there is an incoming call.
4. /SKIP
   Press to skip a message.
5. VOL ()
   During message playback, press to increase the listening volume. While in idle mode, press to increase the base ringer volume.
6. /PLAY/STOP
   Press to start or stop message playback.
7. /ANS ON
   Press to turn the built-in answering system on or off.
8. /DELETE
   Press to delete the message currently playing.
   Press twice to delete all old messages when the phone is not in use.
9. VOL ()
   During message playback, press to decrease the listening volume. While in idle mode, press to decrease the base ringer volume.
10. /REPEAT
    Press to repeat a message.
    Press twice to play the previous message.

Handset

1. EARPIECE
2. LCD DISPLAY
3. CHARGE LIGHT ()
   Steadily on when the handset is charging in the charger.
4. MENU/OK ()
   In idle mode: Press to access the main menu.
   In sub-menu mode: Press to confirm the selection.
   During a call: Press to access Intercom / Phonebook / Redial list / Call list.
5. UP/CALL LIST ()
   In idle mode: Press to access the call list.
   In menu mode: Press to scroll up the menu items.
   In phonebook list/redial list/call list: Press to scroll up the list.
   In editing mode: Press to move the cursor one character to the left.
   During a call: Press to increase the listening volume. During ringing: Press to increase the ringer volume.
6. TALK ON ()
   In idle/pre-dial mode: Press to make a call in earpiece mode.
   In phonebook/redial list/call list: Press to make a call to the selected entry in the list in earpiece mode.
   During ringing: Press to answer a call in earpiece mode.
7. DOWN/REDIAL LIST ()
   In idle mode: Press to access the redial list.
   In menu mode: Press to scroll down the menu items.
   In phonebook list/redial list/call list: Press to scroll down the list.
   In editing mode: Press to move the cursor one character to the right.
   During a call: Press to decrease the listening volume. During ringing: Press to decrease the ringer volume.
8. SPEAKERPHONE ()
   In idle/pre-dial mode: Press to make a call in speakerphone mode. Press again to switch to earpiece mode.
   In phonebook list/redial list/call list: Press to make a call to the selected entry in the list in speakerphone mode. Press again to switch to earpiece mode.
   During ringing: Press to answer a call in speakerphone mode. Press again to switch to earpiece mode.
9. MICROPHONE
10. VOLUME BOOST ()
    During a call: Press to activate/deactivate the VOLUME BOOST function.
11. CANCEL/MUTE ( )
    In main menu mode: Press to go back to idle screen.
    In sub-menu mode: Press to go back to previous menu.
    In sub-menu mode: Press and hold to go back to idle screen. In editing/pre-dial mode: Press to delete a character/digit.
    In editing/pre-dial mode: Press and hold to delete all the characters/digits.
    During a call: Press to mute/resume the microphone. During ringing: Press to silence the handset ringer.
    In idle mode: Press to intercom another handset.
12. TALK OFF ()
    During a call: Press to end a call and go back to idle screen In menu/editing mode: Press to go back to previous menu.
    In menu/editing mode: Press and hold to go back to idle screen. In idle mode: Press and hold to power off the handset.
    Press and hold to power on when it is off.
13. ALPHANUMERIC KEYPAD, STAR (), HASH ()
    In predial or editing mode: Press to insert a digit / character / / .
    key in idle mode: Press and hold to enable or disable the keypad lock.
    key in idle mode: Press and hold to turn on/off the ringer.
    0 key in idle/pre-dial mode/number editing mode: Press and hold to insert a pause.
14. R
    During a call: Press to answer a new call if you subscribed to Call Waiting service from your service provider.
15. PHONEBOOK ()
    In idle mode: Press to access the phonebook.

The phone settings are always set in the same manner: Press Menu/OK button to open the main menu. Then use the ▼▲buttons to select an entry and confirm it by pressing the Menu/OK button.

The factory preset PIN code is 0000

Example:

Set the language on the base

Press MENU / OK , then select ▼▲language, press MENU / OK , then select ▼▲desired language and then press MENU / OK to confirm.

Set the language on the handset

Press MENU / OK , then select ▼▲HS settings, press MENU / OK , then select ▼▲language, press MENU / OK , than select ▼▲desired language and then press MENU / OK to confirm.

MENU SETTING

Handset

PHONEBOOK

• VIEW LIST
  under an entry: ►ADD ►VIEW ►EDIT ►DELETE ►DELETE ALL ►PB STATUS ►FASTDIAL

CALL LIST

• VIEW LIST
  under an entry: ►ADD TO PB ►DELETE ►DELETE ALL
• DETAILS ►CATEGORY

BS SETTINGS

• BS RINGER ►RING VOLUME ►DELETE HS ►DIAL MODE
• FLASH TIME ►CHANGE PIN

HS SETTINGS

• RING SETUP ►TONE SETUP ►SELECT BASE
• LANGUAGE ►RENAME HS ►HS DISPLAY ►AUTO ANSWER

DIRECT MEM

• M1-M2-M3-M4

DATE & TIME

• DATE FORMAT ►TIME FORMAT ►SET TIME ►SET DATE

ALARM

• ON ►OFF

REGISTRATION

• BASE 1, 2, 3 or 4

DEFAULT

• PIN? 0000 by default

ANS. MACHINE

• MSG PLAYBACK ►DELETE ALL ►MEMO ►TAM ON/OFF
• TAM SETTINGS (ANSWER MODE, TAM LANGUAGE, OGM SETTINGS,ANSWER DELAY, RECORD TIME, COMPRESSION, BS SCREENING,REMOTE ACC, CHANGE PIN)

HANDSET REGISTRATION

Note: Handset and base station are pre-registered.
Up to five handsets can be registered to a single base station. In the case of re-registration, the PIN code is 0000.

Registration a handset

On Handset: Press MENU/OK select▼▲ REGISTRATION

Press MENU/OK select ▼▲BASE(1-4), Press MENU/OK enter 4 digits PIN for the base PIN.

At the same time on Base: press and hold /HANDSET LOCATOR on the base to enter the registration mode.

After a short delay, if the registration is successful, there will be a confirmation beep, and the handset display will go back to idle mode with the new handset number shown. The base display will also go back to idle mode.

De-Registration

On Handset: Press MENU/OK , select ▼▲BS SETTINGS, press MENU/OK , select ▼▲DELETE HS, press MENU/OK enter PIN 0000, press MENU/OK , select ▼▲one of the handsets that you want to de-register, press MENU/ OK to confirm.

INTERCOM

Internal Call

Press C / MUTE , Enter the desired handset number on keypad.

NOTE:
If only one cordless handset is registered to the base station, internal call will not be available.

Call All Handsets

Press C / MUTE , Enter "9" on keypad.

Transfer an External Call

Press MENU / OK , select ▼▲INTERCOM, Press MENU / OK ,
Enter the desired handset number on keypad.
After connection quit the call on handset.

Conference Call

Press MENU / OK , select ▼▲INTERCOM, Press MENU / OK ,
Enter the desired handset number on keypad.
After connection press and hold until CONFERENCE is shown.

NOTE:
Any party hangs up during a conference call will leave the other party still in connection with the external call.

PHONEBOOK

Your phone can store up to 50 private phonebook in the cordless handset and the telephone base with names and numbers. Each phonebook entry can have a maximum of 20 digits for the phone number and 12 characters for the name. You can also select different ringer tones for your phonebook entries.

Phonebook entries are stored alphabetically by name.

To Add new entry

In idle mode:

Press MENU / OK , select ▼▲PHONEBOOK to access the phonebook list ( or empty),

Press MENU / OK to select ADD.

Press MENU / OK to select NAME,enter the name. Press MENU / OK to select NUMBER, enter number.

Press MENU / OK and ▼▲ to select the desired ringtone for your phonebook entry.

Press MENU / OK to save.

DIRECT MEM

Your AMPLIDECT295 base can also paired as additional handsets with some specific handset/device like our PhotoDECT295 or EMERGENCY295 which need direct memory numbers programed in the base, and these numbers ( 4 maxi ) have to be added through the regular handset.

On Handset : Press MENU / OK , select ▼▲DIRECT MEM,

Press MENU / OK , select ▼▲M1-M2-M3-M4, Press MENU / OK , enter number then OK.

ANSWERING MACHINE

Your telephone base includes a telephone answering machine that records unanswered calls when it is on. The answering machine can store up to 59 messages within the maximum recording time of approximately 15 minutes. As well as recording incoming messages, you can record memos for other users of your phone.

Press /ANS ON/OFF to switch the answering machine ON or OFF.

REMOTE OPERATIONS

If you are away from your home, you can call your answering machine to switch on or off the answering machine and listen to your messages remotely using another tone-dialing phone.

1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts playing OGM, press .
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
4. Press the following keys to carry out your desired function.

NOTE:
When your answering machine memory is full and the answer mode is in ANS & RECORD, the answer mode will change to ANSWER ONLY automatically.

It will change to ANS & RECORD mode automatically after some messages have been deleted.

You cannot delete new messages before they were listened.

TECHNICAL SPECIFICATIONS

MAINTENANCE

Clean the surface of the housing with a soft, fluff-free cloth. Do not use any cleaning agents or solvents.