Setting Up - Geemarc PhotoDECT User Manual

INSTALLATION

Setting Up

Plug the power cable into the power socket on the base. Plug
the adaptor end of the power cable into the mains supply and
switch the supply on. (*)
Connect the line cord plug to the line socket on the base.
Connect the other end of the line cord to the PTT socket. (**)
Install the rechargeable batteries in the handset. The handset
requires two Nickel Metal Hydride (NiMH) AAA batteries. These
are supplied with your telephone. Slide the battery cover in the
direction of the arrow and pull it out. Check the battery polarity
diagrams on the handset when inserting the batteries. Fit the
battery cover by sliding the cover on to the back of the handset
until it snaps shut.
(*) Classified "hazardous voltage" according to EN60950 standard
(**) Classified TNV-3 according to EN60950 standard.
15