Register A New Handset - Geemarc PhotoDECT User Manual

ADDITIONAL HANDSETS & BASES

Register a new Handset

Before registering a handset to the base, you should press and
hold the key on the bottom of the base for about 5 seconds
and then release it.
Press
Use and
Use and
Press
handset will search for the requested base and the
relevant information will flash on the LCD.
If the base is found and the handset is successfully
registered, you will be prompted to enter the PIN code
If the PIN code is accepted, the registration tone will
sound and the base assigns a number to the handset. If
the PIN code entered is invalid, a warning tone will sound,
and the handset will return to the
(left side) to activate the menu
to scroll through the menu to select
'REGISTRATION'
Press (left side) to select
to scroll through the base names list
(left side) to select desired base.
(the default is 0000).
previous registration state.
60
The