Misc (3) Tab Descriptions
Table B-6
Field
Use DHCP
This check box control specifies whether the AirBEAM Smart Client uses the DHCP
server
response option 66 to specify the IP address of the FTP/TFTP server.
If enabled, special RF network registry settings are required to force the DHCP server to
return the "TFTP server name" field (option 66). The special RF network registry settings are
included, but commented out, in the radio network registry initialization files
(essid_xxxx_yy.reg).
Use DHCP
This check box control specifies whether the AirBEAM Smart Client uses the DHCP
bootfile
response option 67 to specify the Package and Package 1 parameters.
If enabled, special RF network registry settings are required to force the DHCP server to
return the "Bootfile name" field (option 67). The special RF network registry settings are
included, but commented out, in the radio network registry initialization files
(essid_xxxx_yy.reg).
Misc(4) Tab
Use this tab to configure various miscellaneous features.
Misc (4) Tab
Figure B-8
AirBEAM Smart Client
Description
B - 7