5 - 2
MC17/MC17A/MC17T/MC17U Product Reference Guide
Remove Access Panel
Figure 5-1
CAUTION
Align the Development Cable connector with the connector on the mobile computer.
3.
Hand-tighten the two thumbscrews until tight.
4.
Install Development Cable
Figure 5-2
Insert the mobile computer into a cradle.
5.
Torx Screw
Access Panel
Do not remove the access cover while the mobile computer is on and do not operate the mobile
computer with the access cover removed. Follow proper Electro-Static Discharge (ESD) precautions
to avoid damaging the MC17. Proper ESD precautions include, but are not limited to, working on an
ESD mat and ensuring that the operator is properly grounded.
Development Cable
ActiveSync Connector