Mounting The Power Supply Housing - Motorola MC17 Product Reference Manual

Mounting the Power Supply Housing

The power supply can be housed in a plastic housing, p/n PSS-3PS04-00R, to match the Charging cradles and
hide bare power supplies and cables. This section provides the information required to mount the plastic
housing.
NOTE The power supply should be mounted in landscape orientation.
135.9 mm
(5.35")
(View from Inside Housing)
The depth of the fully-assembled power supply decorative housing is 81.23 mm (3.198").
Power Supply Housing Mounting Template
Figure 8-12
Feed cables through access holes in bottom housing.
1.
Plug connectors into power supply.
2.
Place power supply into bottom housing.
3.
Place two mounting brackets over power supply and secure each mounting bracket with two screws.
4.
68.4 mm
(2.693")
UP
254.0 mm
(10.00")
109.4 mm
(4.307")
115.9 mm
(4.562")
10 mm
(0.394")
Cradle Installation 8 - 9
38.1 mm
(1.50")