Motorola VC6000 Series Product Reference Manual page 124

7 - 42 VC6000 Series Product Reference Guide
Security
Enabling a PIN
NOTE Place emergency calls at any time, without requiring a PIN or a SIM card
To require a PIN when using the phone:
From the
1. Phone
Enter PIN
Figure 7-12
Use the touch keypad to enter a four to eight digit PIN.
2.
Tap to enable the PIN and return to the
3. Enter
Changing a PIN
If you enter an incorrect PIN, the message "SIM PIN incorrect: Try again" appears. After three consecutive
CAUTION
incorrect attempts, the SIM card is blocked. The phone does not allow you to attempt to enter your PIN
again and you must obtain a PIN Unblock Key from your service provider.
From the
1. Phone
Use the touch keypad to enter the current PIN.
2.
Tap .
3. Enter
Use the touch keypad to enter a new four to eight digit PIN.
4.
Tap .
5. Enter
Reenter the new PIN for confirmation and tap
6.
Tap to confirm the change.
7. ok
Disabling a PIN
From the
1. Phone
Use the touch keypad to enter the current PIN.
2.
Tap .
3. Enter
Tap to confirm the change.
4. ok
tab (Figure 7-11), select the
tab (Figure 7-11), tap
Change PIN
tab (Figure 7-11), deselect the
Require PIN when phone is used
tab.
Phone
.
.
Enter
Require PIN when phone is used
.
check box under .
Security
check box.