Enhanced Operator Name String; Service Provider Name Display - Motorola VC6000 Series Product Reference Manual

Using a registry editor, navigate to the following:
[HKEY_LOCAL_MACHINE\SOFTWARE\Symbol\RIL\RHA\HC25]
Create the following key:
"SyncSystemTime"=dword:00000001
where:
dword:0 = disabled
dword:1 = enabled
After setting the registry key, warm boot the VC6000 Series.

Enhanced Operator Name String

The VC6000 Series is enabled to download and display the name of the GSM network currently logged in to. Four
registry keys on the VC6000 Series have to be edited to disable this feature.
Using a registry editor, navigate to each of the following:
[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL]
[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL\Configurations\GSM_HC25]
[HKEY_LOCAL_MACHINE\Comm\Cellular\Ril]
[HKEY_LOCAL_MACHINE\Comm\Cellular\Ril\Configurations\GSM_HC25]
Edit the following key:
"EonsEnable"=dword:1
where:
dword:0 = disabled
dword:1 = enabled (default)
After setting the registry key, warm boot the VC6000 Series.

Service Provider Name Display

The reg key ("UseServiceProviderName") originally was used to fix the dual-line SIM card issue with value 2. But
for the Italian Post, the value 1 should be used to show the virtual carrier name (Poste Mobile).
[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL]
"UseServiceProviderName"=dword:1
where:
dword:0 = Display provider name
dword:1 - Display service provider name (default)
dword:2 - Display both provider and service provider name
GSM Configuration 7 - 49