Hands-Free Services - Motorola VC6000 Series Product Reference Manual

Vehicle computers
Hide thumbs Also See for VC6000 Series:
Table of Contents

Advertisement

Ensure the VC6000 Series is discoverable and connectable. See Device Info Tab on page 6-23.
1.
Ensure that the Headset profile is enabled on the VC6000 Series. See Profiles Tab on page 6-32 for more
2.
information.
Use the Connection Wizard to search for a Bluetooth headset.
3.
Select the device and tap Next.
4.
Select the Headset service name and select Connect. The VC6000 Series connects to the headset. Refer to
5.
the headset user manual for instructions on communicating with a Bluetooth device.
NOTE When using a Bluetooth headset with Headset Services, you cannot accept or end a call from the headset.
You must accept or end a call on the VC6000 Series.
Press the communication button on the headset. This routes both system and WAN call audio to the headset.
6.
When a call is received on the VC6000 Series, tap the Accept button to answer the call.
7.
Press the communication button on the headset to route the audio back to the VC6000 Series.
8.
NOTE If a wired headset is connected to the VC6000 Series, the Bluetooth headset connection is disconnected.

Hands-free Services

To connect to a Bluetooth headset:
NOTE Newer Bluetooth headsets are device dependant and remember the last device they connected to. If problems
occur while connecting to the headset, place the headset in discovery mode. Refer to the headset user manual
for more information.
Only WAN audio is routed to the headset. System audio is still emitted through the VC6000 Series speaker.
You can accept calls and re-dial using the Hands-free profile.
Hands-free profile does not support 3-way calling.
Ensure the VC6000 Series is discoverable and connectable. See Device Info Tab on page 6-23.
1.
Ensure that the Hands Free profile is enabled on the VC6000 Series. See Profiles Tab on page 6-32 for more
2.
information.
Use the Connection Wizard to search for a Bluetooth hands-free headset.
3.
Select the hand-free device and tap Next.
4.
Select the Hands-free service name and select Connect. The VC6000 Series connects to the headset. Refer
5.
to the headset user manual for instructions on communicating with a Bluetooth device.
During an active connection, the VC6000 Series cannot go into suspend mode when the Power Button is
6.
pressed. A message appears notifying the user.
Once the WAN call is disconnected (with Hands-free profile) the Power button is enabled.
Using Bluetooth 6 - 17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents