Perform The Auto Gradation Adjustment - Canon Color Image Reader - L1 Service Manual

Perform the Auto Gradation Adjustment

Be sure to follow the below steps to perform the auto gradation adjustment (full adjust).
1) Clean the scanning glass surface of the host machine copyboard glass.
2) Set the following paper in the "deck 1".
• Size: A3, A4, 11"x17" or LTR
•
Type: High quality paper 64 g – 105 g/m2 (thin paper or plain paper)
3) Select [Additional Function] > [Common Settings] > [Register Paper].
4) Select ("deck 1") as the pickup position to register the paper type, and select [Set].
5) Select the set paper size, and press [Next].
6) Select the set paper type, and press [OK].
7) Select Service Mode > COPIER > OPTION > IMG-MCON > PASCAL (Lv.1), and make sure that it is specifi ed to "1". (default ; 0)
8) Exit the Service Mode.
9) Select [Additional Function] > [Adjustment/Cleaning] > [Auto Gradation Adjustment] > [Full Adjust]
10) In the "Selecting the test print paper" screen, select "deck 1", and press [testprint 1]. Testprint is outputted.
11) Following the control panel screen, set the testprint in the copyboard glass.
12) Press [start scan] key. Test print is scanned.
13) Remove the testprint off the copyboard glass.
MEMO:
The number of outputted testprint :
•
Color image reader - L1 equipped only : 1 sheet
•
When Color Image Reader-L1 and imagePRESS Server are equipped: 3 sheets
•
When Color Image Reader-L1 is equipped and PS Multi Kit is enabled: 3 sheets
6
Installation
6
Installation
6-28
6-28