Install the external cover
Installed at the same time with the host machine
1
1) After installing the upper right cover 1, turn it in the direction of the arrow until the control panel stops.
•
2 stepped screws (tighten).
•
Claw, 1 place.
2
2) Install the upper left cover-2 of the host machine.
•
1 stepped screw (M4) (packaged together with the host machine).
•
1 screw (TP ; M4 x 8) (packaged together with the host machine).
•
1 cover rubber (packaged together with the host machine).
MEMO:
•
When installing the stepped screw, cut the tap with the
screw thread and tighten it.
•
Once the stepped screw is installed, it won't come off.
6
Installation
x2
x2
6
Installation
6-19
6-19