Canon Color Image Reader - L1 Service Manual page 70

5
5) Install the upper right cover-2
•
2 screws (M4) (packaged together with the host machine).
•
2 cover rubbers (packaged together with the host machine).
MEMO: MEMO:
• •
When installing the stepped screw, cut the tap with the When installing the stepped screw, cut the tap with the
screw thread and tighten it. screw thread and tighten it.
• •
Once the stepped screw is installed, it won't come off. Once the stepped screw is installed, it won't come off.
6
6) Install the reader rear cover.
•
4 screws (TP ; M4 x 8) (packaged together with the host machine).
x4
6
Installation
x2 x2
6
Installation
7
7) Remove the connector cover (the remove connector cover will not be used anymore).
•
2 screws (the removed screws will be used on step 9))
x2
6-21
6-21