Canon Color Image Reader - L1 Service Manual page 65

9
9) While lifting and holding the reader in the direction of the arrow and remove the reader mount (the removed reader mount will not be used anymore).
10
10) Install the reader fi xing plate (left/right).
•
1 Screw each. (TP ; M4 x 8)
6
Installation
x2 x2
6
Installation
CAUTION: CAUTION:
• •
Do not over lift the reader in the direction of the arrow. Do not over lift the reader in the direction of the arrow.
• •
Make sure that the wire is surely installed. Make sure that the wire is surely installed.
6-16
6-16