Canon Color Image Reader - L1 Service Manual page 45

5
Adjustmnet
6) Input the value written the service label (the inside of PCB cover).
Lv. COPIER > ADJUST > ADJ-XY >
ADJ-X ADJ-Y-DF
1
ADJ-Y STRD-POS
Lv. COPIER > ADJUST > CCD >
W-PLT-X DFTBK-R
W-PLT-Y DFTBK-G
W-PLT-Z DFTBK-B
SH-TRGT DFTBK-BW
1
DFTAR-R DFCH2R2
DFTAR-G DFCH2R10
DFTAR-B DFCH2B2
DFTAR-BW DFCH2B10
2 100DF2RG 100DF2GB
Lv. COPIER > ADJUST > PASCAL >
1 OFST-P-K -
7) Perform computation for front & back linearity matching.
Lv. COPIER > FUNCTION > CCD >
1 DF-LNR
8) Input the value written in the service label (inside PCB cover).
Lv. FEEDER > ADJUST >
1 DOCST LA-SPEED
9) Perform output adjustment of the sensor.
CAUTION:
Be sure that there is no paper inside the DADF.
9-1) Perform service mode item.
Lv. FEEDER > FUNCTION >
1 SENS-INT
5
Adjustmnet
ADJ-X-MG ADJY-DF2
- -
DFCH2G2 DFCH-B10
DFCH2G10 DFCH-G2
DFCH2K2 DFCH-G10
DFCH2K10 DFCH-K2
DFCH-R2 DFCH-K10
DFCH-R10 100-RG
DFCH-B2 100-GB
- -
- -
- -
DOCST2 LA-SPD2
10) Adjust tray width. Perform either AB system or Inch system.
a. AB system adjustment.
a-1) Select the item in the service mode.
Lv. FEEDER > FUNCTION >
1 TRY-A4
a-2) Adjust the slide guide to the index "A4/A3".
a-3) Press OK, and register the A4 width.
a-4) Select the item in the service mode.
Lv. FEEDER > FUNCTION >
1 TRY- A5R
a-5) Adjust the slide guide to the index "A5R".
a-6) Press OK, and register the A5R width.
b. Inch system adjustment.
b-1) Select the item in the service mode.
Lv. FEEDER > FUNCTION >
1 TRY-LTR
b-2) Adjust the slide guide to the index "LTR/ 11x17".
b-3) Press OK, and register the letter width.
b-4) Select the item in the service mode.
Lv. FEEDER > FUNCTION >
1 TRY- LTRR
b-5) Adjust the slide guide to the index "STMT/ LTRR/ LGL".
b-6) Press OK, and register the LTRR width.
11) Make an output of P-PRINT.
Lv. COPIER > FUNCTION > MISC-P >
1 P-PRINT
12) Store the outputted P-PRINT into the service book.
5-4
5-4