Canon Color Image Reader - L1 Service Manual page 58

5
5) Remove the upper front cover.
•
Loosen 3 screws.
•
Remove 1 screw cover rubber.
7
7) Remove the upper left cover 2.
•
Remove 1 screw.
•
Loosen 1 stepped screw.
•
Remove 1 cover rubber.
6
Installation
6
6) Remove the upper cover [1] of host machine. (The upper cover detached is not used.)
•
3 screws [2] (the removed screw will be used in the step 6) in "Install the external cover"
Installed after the host machine installation.)
x1 x1
6
Installation
x3
8
8) Turn the control panel in the direction of the arrow until it stops.
6-9
6-9