Canon Color Image Reader - L1 Service Manual page 57

Installed after the host machine installation
1
1) Remove 3 screws of the upper cover. (the removed screw will be used in the step 6) in "Install the
external cover" Installed after the host machine installation).
x3
3
3) Remove the 2 stopper pins.
•
2 screws
x2
6
Installation
6
Installation
2
2) Remove the upper right cover 2 [1].
•
Loosen 2 stepped screws.
•
Remove 2 cover rubbers.
4
4) Open the front left cover fi rst, then front right cover.
6-8
6-8