Canon Color Image Reader - L1 Service Manual page 61

2
2) Install the wire (host machine side).
•
1 stepped screw (M3)
x1
3
3) Install 2 stepped screws (M3) to the host machine.
x2
6
Installation
6
Installation
[A]
CAUTION:
•
Be sure not to remove
the screw as the DADF
might drop.
•
Do not drop the screw.
4
4) Install the reader support plate.
6-12
MEMO:
Make sure that the wire
does not fall to the [A] part.
MEMO :
During installation,
hook and install it on
the stepped screw
installed in step 3).
6-12