Programming The Hotkey - Blaupunkt TravelPilot RNS 149 Operating Instructions Manual

Set-up/Basic settings
Press OK 8 or << >> on the rocker switch 7.
The menu item selected will appear in a frame. Now you can adjust the setting.
Use << >> on the rocker switch 7 to adjust the setting.
To help you select the right setting, the volume will increase and decrease as
you make the setting.
Press OK 8.
If you press ESC 9 to exit the menu, the setting will not change and the menu
will close.

Programming the hotkey

The hotkey 4 is the upper softkey on the left-hand side of the display. The
hotkey is a special feature you can use to adapt the TravelPilot to your own
personal requirements. You can select the function of the hotkey from a list of
nine possible functions:
• TA-function
• Route guidance
• Route options
• Last 10
• Dest. memory
• Position mark
• GPS status
• Time info
• Locating mode
Program the hotkey as follows:
Press the hotkey 4 down until the Hotkey Set-up menu appears.
Set-up menu Volume
Set-up menu
76