Cancelling Route Guidance; No Map Route Guidance - Blaupunkt TravelPilot RNS 149 Operating Instructions Manual

Navigation

Cancelling route guidance

To cancel active route guidance,
Press ESC 9 or start new route guidance or activate the locating mode.
When you press ESC 9, you will be prompted to confirm your selection.
If you really want to cancel route guidance,
Select YES and
Press OK 8.
If you switch the system off during active route guidance, the data for route
guidance will remain stored for another 30 minutes. During this time you can
continue your trip with route guidance. After 30 minutes have passed, you must
start route guidance again.

NO MAP route guidance

NO MAP route guidance will be in effect if the navigation CD is removed after
the destination has been entered and route guidance has been started. During
NO MAP route guidance, you can use the integrated CD player to play audio
CDs (only possible for navigation CDs with the corresponding data base).
When NO MAP route guidance is active, NO MAP will appear in the top line of
the display and the distance to your destination as the crow flies will appear in
the symbol field on the left. In addition, the display will also indicate the direction
to the destination.
For technical reasons it may take several minutes for route guidance to resume
properly with spoken driving recommendations and the pictograms after the CD-
ROM has been re-inserted into the CD drive. This time is required for the system
to clearly identify the current vehicle position. During this time, OFF ROAD may
appear in the display. In densely built-up areas with a closely woven network of
roadways, the locating function may not always be accurate until the system is
able to orient itself clearly. If possible, place the CD-ROM back into the system
on the motorway to speed up the locating process.
Cancelling route guidance
48