Related Manuals for Blaupunkt TravelPilot DX-R4
Summary of Contents for Blaupunkt TravelPilot DX-R4
- Page 1 TravelPilot Navigation Radio/CD TravelPilot DX-R4 / RNS4 Operating instructions http://www.blaupunkt.com...
-
Page 2: Cd Changer Setup Index
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Device overview... - Page 3 button, opens the control panel. ESC button, closes menus and deletes characters in the speller menu. Rocker switch. The way the rocker switch functions de- pends on the individual menus and operating modes. MEN button, opens the setup menu. AUD button, opens the audio menu. Knob/pushbutton to select, enter and confirm items in lists and selection menus.
- Page 4 If the statutory guarantee period in your or general computer and positioning er- navigation system that will lead you ex- country is less than 12 months, Blaupunkt rors. Blaupunkt does not accept liability actly to your destination. will grant a 12-month manufacturer’s...
-
Page 5: Overview Of Navigation Functions
Overview of navigation functions If the name of the town you are looking NAVIGATION CITY/PLACE for appears in the name match line, keep ROUTE GUIDANCE the right knob/pushbutton pressed for DEST. ENTRY HANNOVER longer than two seconds. You can also DEST. - Page 6 INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX CITY/PLACE DEST. ENTRY SCHLOSSWEND… BERLIN STREET 03h58 BERLIN, NEUENH… CENTRE 461 mi BERLIN, RÜDERS… DEST. SURROUND BERLIN, SCHÖNE… Europe 1 BERLIN, SCHÖNE… If you press the right knob/pushbutton for In the following selection, choose between Navigation begins.
-
Page 7: Safety Information
Safety information The TravelPilot has been designed for use in passenger cars. Special information such as height restrictions or maximum permitted road load, which is required for navigating trucks and buses, is not included on the navigation CDs. Inserting / removing a CD •... -
Page 8: Table Of Contents
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Device overview ......2 Radio mode ......... 56 CD changer mode ....... 81 Switching to radio mode ......56 Selecting a CD ..........83 Overview of navigation Selecting the frequency range or Selecting tracks .......... -
Page 9: About These Instructions
About these instructions The aim of these instructions is to familiarize you with the functions of the Travel- Pilot and ensure that you can safely and successfully operate the unit. Before starting to use your TravelPilot, please read these instructions carefully and keep them in a safe place in your vehicle. -
Page 10: Switching The Unit On/Off
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Switching the unit on/off Press the left knob/pushbutton @ to switch on your TravelPilot. The unit plays the audio source that was active last at the preset volume level. You can find out how to set the power-on volume in the section entitled “Config- uring power-on / telephone / navigation / traffic information announcement vol- ume and GALA settings”... -
Page 11: Selecting The Operating Mode
Selecting the operating mode JUMP To select the operating mode, press: the TU button A for radio mode or JUMP RADIO 1 the CD-C button ? for CD or CD-changer (optional) mode or EUROPE the NAV button < to activate navigation. EINSLIVE JAM FM If you change the source using one of these buttons, the main menu of... -
Page 12: Adjusting The Volume
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Switching between the navigation system’s main menu and navigation menu If you want to switch between the main menu and the navigation menu during an active navigation, press the NAV button <. If navigation is not active, position-tracking mode will be displayed. -
Page 13: Display
Display JUMP The TravelPilot’s display contains all the navigation information (e.g. visual driv- ing recommendations), menus and lists, as well as the menus relating to the JUMP RADIO 1 radio, CD and CD changer (optional) audio sources. If the unit is connected as described in the installation instructions, the display EUROPE switches to night-time mode when the vehicle lights are turned on. -
Page 14: Adjusting Audio Settings And Sound Distribution Settings
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Adjusting audio settings and sound distribution settings FM TONE The TravelPilot allows you to adjust the bass and treble for each audio source. BASS Changes to the balance and fader sound distribution settings and loudness set- TREBLE tings (aurally compensated volume) affect all the audio sources. -
Page 15: Switching A Coded Unit On After Disconnection From The Battery Power Supply
Switching a coded unit on after disconnection from the bat- CODE tery power supply If you switch on a coded unit after having disconnected it from the battery power supply (for instance, after having carried out a repair to the vehicle), a query will appear requesting that you enter the code. -
Page 16: Navigation
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Navigation The navigation system in the TravelPilot helps you find your way to destinations quickly and safely without first having to spend time studying a roadmap. When navigation is active, you will be guided by the voice output. The system will warn you in good time about approaching turning-off points. -
Page 17: Entering A Destination
The software is loaded from the CD. The progress is indicated in the NAVIGATION display. ROUTE GUIDANCE Note: The process of loading the software from the navigation CD must not be interrupted. DEST. ENTRY DEST. MEMORY Starting navigation TOURLIST Press the NAV button < whilst the unit is switched on. TRAVEL GUIDE The main navigation menu opens. - Page 18 INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX • Previously saved special destinations such as train stations, airports, petrol stations and other public facilities. You can view a sorted list of special destinations for the destination town, the area around a destination, on a national level or in the vicinity of the vehicle position.
- Page 19 When the required character is highlighted, press the right knob/push- CITY/PLACE button ;. The character will be entered into the input line. An appropriate entry from the list will be displayed in the match line as you enter more and HANNOVER more characters.
-
Page 20: Route List
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Deleting letters To delete a letter that you entered accidentally, press the ESC button 9 or symbol and press the right knob/pushbutton ;. highlight the The input cursor will move to the left in the input line. If the required name appears in the match list whilst you are entering the name in navigation mode, keep the right knob/pushbutton ;... - Page 21 Paging through lists To find the entry you are looking for quickly in large lists, you can also browse the list page by page. Use the right knob/pushbutton to move the selection bar to the arrow symbol. Press the right knob/pushbutton ;. The previous or next list page is displayed.
- Page 22 INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Entering a destination - town DEST. ENTRY If you want to drive to a destination in a town, you first have to specify one. CITY Select the DEST. ENTRY item in the main navigation menu. STREET The destination input menu opens.
- Page 23 Press the right knob/pushbutton ; to accept the place as your destina- tion. If there are multiple instances of the town’s name, a submenu will open. You can then select the required town from it. If you do not want to accept the town as your destination, press the ESC button 9.
-
Page 24: House Number
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Enter the street name using the speller. DEST. ENTRY Select the required street name from the list. CONTINUE If the street name occurs several times in the destination town, a sub- menu will open in which you can specify the street precisely. - Page 25 You can specify route options in order to customise the route to suit your partic- INTERSECTION ular requirements, e.g. excluding motorways. For further information, read the section entitled “Route options” in this chapter. AUF DEM LOH Entering a destination - junction BODESTRASSE If you selected INTERSECTION in the destination input menu, a list of the availa- GERHARDTSTRASSE...
- Page 26 INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Special destinations in the destination town, in the area DEST. ENTRY around the destination, in the area around your position and national destinations CITY Special destinations that can be used to enter a destination are combined in STREET categories.
- Page 27 POS. SURROUND: This includes special destinations within the vicinity of the current vehicle position (this function is particularly useful when look- ing for facilities such as petrol stations). Special destinations - at your final destination Before you can select special destinations for your final destination, you first have to enter at least a town or, in the case of larger towns, a town centre as the destination.
- Page 28 INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Special destinations - national destinations P.O.I. You can also select items such as motorway junctions, service stations, airports or border crossings as your destination. You do not need to previously enter a IN DEST AREA destination to do so.
- Page 29 Special destinations - destination surrounding area DEST. ENTRY Before you can select special destinations that are in the vicinity of the destina- tion, you first have to enter a town as the destination. STREET Enter a town as the destination. CENTRE Select DEST.
- Page 30 INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Navigation begins. For further information, read the section entitled “Navigation”. Entering a destination - from the destination memory You can save destinations, which you drive to regularly, in the destination mem- ory so that you can access them easily for other navigation sessions.
- Page 31 Entering a destination - position marker You can set one of your preset position markers as a destination. A position marker is a vehicle position that you set during an active navigation session or when you used the system to determine your position. As an example, you can set position markers at interesting places that you want to return to on another occasion.
-
Page 32: Navigation
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Navigation NAVIGATION Starting navigation ROUTE GUIDANCE Once you enter a destination, navigation begins automatically. DEST. ENTRY If you want to begin a navigation session to the navigation system’s last destina- tion, DEST. - Page 33 In the right of the display you can optionally display either the approxi- mate remaining journey time to the destination, the approximate arrival time or the current time. For further information, read the section entitled “Selecting time info”. The distance as the crow flies appears beneath the time display whilst the route is being calculated.
- Page 34 INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Changing the audio source You can change the audio source at any time during navigation. Press the TU A or CD-C ? button during an active navigation session. The main menu for radio mode or CD changer mode opens. CD changer mode is only available if a CD changer is connected and operational.
-
Page 35: Dynamic Navigation
Dynamic navigation NAVI. MENU During dynamic navigation, the TravelPilot analyses digital traffic information ROUTE OPTION messages and uses this information when planning the route. The traffic messages are received from TMC (Traffic Message Channel) stations. These ROUTE LIST are RDS stations which also broadcast their traffic messages in digital form POSITION MARK (for further information, read the section entitled “TMC”... -
Page 36: Tour List
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Tour list TOUR LIST The tour list allows you to combine individual destinations in a “tour”. NEW DEST. TIP: The tour list is a convenient way of planning such things as inspec- STORE DEST. - Page 37 You can now move the destination to the required position in the tour memory: TOUR LIST Press the right knob/pushbutton ;. NEW DEST. A reposition marker appears in front of the destination. Use the right knob/pushbutton ; to move the destination to the required STORE DEST.
- Page 38 INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Sorting the tour To sort the tour, select the SORT DEST. item in the TOUR LIST menu. Press the right knob/pushbutton ;. The tour list is displayed. Highlight the destination that you want to reposition. Press the right knob/pushbutton ;.
- Page 39 Deleting the whole tour To delete a whole tour, select the CANCEL DEST. item in the TOUR LIST menu. Press the right knob/pushbutton ;. A selection menu is displayed. Highlight ALL DESTS.. A confirmation request is displayed. Highlight DELETE. Press the right knob/pushbutton ;. Starting a navigation session to a tour destination To start a navigation session to a tour destination, select the START TOUR item in the TOUR LIST menu.
-
Page 40: Travel Guide
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX NO MAP navigation NO MAP navigation begins if you remove the navigation CD after having en- tered the destination and started the navigation session. TIP: During a NO MAP navigation session you can use the internal CD drive to play an audio CD. - Page 41 Historical buildings NAVIGATION The information available can include addresses, telephone numbers, prices and facilities provided by hotels and restaurants. DEST. ENTRY Since the stored information depends on the travel guide on your CD, we cannot DEST. MEMORY provide any detailed description of the contents here. If only one travel guide is TOURLIST present, the name of the guide, e.g.
-
Page 42: Destination Memory
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Once you have read the list, close the menu by pressing the NAV button <. The navigation menu reappears. Position tracking mode In position tracking mode, the name of the road you are currently driving down is displayed in the title line. - Page 43 Select DEST. MEMORY in the main navigation menu. Open the EDIT MEMORY item in the destination memory menu. Select SAVE DEST.. A speller will open for you to enter a short name. Enter a short name for the destination and confirm it. If you do not want to assign a short name to the destination, keep the right knob/pushbutton ;...
- Page 44 INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Sorting destinations manually You can also sort destinations manually in the destination memory. You can then access this list of manually sorted destinations from the destination memo- ry when selecting your destination. To sort the destinations, open the EDIT MEMORY item in the destination memory menu.
-
Page 45: Gps Status
A menu containing the following options appears: SINGLE DEST.: You can select and delete individual destinations from the list of saved destinations. ALL DESTS.: All destinations in the destination memory are deleted. A confirmation request appears after you select the required option. Confirm your selection with DELETE or return to the previous menu with ABORT. -
Page 46: Bypassing A Traffic Jam During Navigation
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Bypassing a traffic jam during navigation SETTINGS Alongside the feature for automatically bypassing traffic jams with the aid of the MODIFY ROUTE dynamic navigation feature, the TravelPilot also gives you the option of manual- ly entering traffic jams or blocked sections of road during an active navigation TRAFFIC AHEAD session. - Page 47 Cancelling the traffic jam bypass feature Open the traffic jam bypass menu. Select CLEAR and press the right knob/pushbutton ;. The navigation menu opens again and the route list is recalculated. Excluding a route section from the route list You have the option of excluding individual sections from the calculated route. This is useful if you are informed of road closures or construction sites along your route and you want to avoid these areas.
- Page 48 INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Use the right knob/pushbutton ; to move the selection marker to the first road that you want excluded from your route. If necessary, open longer sections as already described. Press the right knob/pushbutton ;. A circle is displayed in front of the destination.
-
Page 49: Defining Route Options
Defining route options NAVI. MENU You can customise the route to suit your requirements at any time, even during ROUTE OPTION an active navigation session. ROUTE LIST The configurable parameters are: ROUTE: Choose between the quickest, the shortest or dynamic (DYN.) POSITION MARK navigation with TMC. -
Page 50: Setting A Position Marker
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX If you want to close the selection menu, press the ESC button 9 (you will return to the navi menu) or select the CONTINUE menu item and press the right knob/pushbutton ;. If navigation is not active, the navi menu will be displayed again. - Page 51 Saving a position marker NEW NAME After you press the right knob/pushbutton ;, a selection menu opens. You are now given the option of assigning a name to the position marker or returning to HOME the menu in which you set the position marker. TIME: 03:27 If you select the NAME option and enter a name for the position marker, the ABCDEFGHIJKLMNO...
-
Page 52: Activating / Deactivating Voice Output
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Traffic announcements during navigation You can switch traffic announcement standby during navigation on/off. Press the TA button 4. The TA function is activated or deactivated. Activating / deactivating voice output You have the option of navigation with or without voice output. - Page 53 Activating / deactivating the last 10 destinations memory NAVI. MENU If the LAST 10 option is activated, the last 10 navigation destinations are stored LANGUAGE automatically in memory. You can also deactivate the LAST 10 memory. Press the MEN button :. LAST10 The navigation session’s navi menu appears.
-
Page 54: Manually Setting Your Position
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Manually setting your position NAVI. MENU If GPS reception is not available, you can manually set your position yourself. LANGUAGE Press the MEN button :. LAST10 The navi menu is displayed. TIME INFO Highlight the MAN. -
Page 55: Simulating Navigation
Simulating navigation The TravelPilot provides you with the option of simulating a navigation session. During the simulation, the system provides visual driving recommendations and voice output in real-time. If you want to start a navi simulation, press the MEN button :. The navi menu is displayed. -
Page 56: Radio Mode
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Radio mode JUMP Switching to radio mode JUMP RADIO 1 Press the TU button A. The main menu opens in radio mode. The station that was received last EUROPE will be heard. JAM FM EINSLIVE The six softkeys on both sides of the display are used for selecting and storing... -
Page 57: Activating / Deactivating Rds-Reg
Switch to radio mode. JUMP Press the MEN button :. The radio mode’s setup menu appears. SEARCH >> You will find the RDS item in the lower left display line. You can choose between the VAR, FIX and OFF options. The default setting is VAR. SHARX Keep pressing the softkey assigned to RDS until the required option ap- VAR OFF... -
Page 58: Switching Pty On/Off
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Press the MEN button :. JUMP The setup menu is displayed. Keep pressing the softkey that is assigned to REG until the required op- SEARCH >> tion appears alongside REG. The default setting is OFF. SHARX Switching PTY on/off VAR OFF... -
Page 59: Ta (Traffic Announcement)
TA (Traffic Announcement) Traffic announcements (TA) are a service provided by the broadcasting sta- tions. Traffic information announcements are broadcast regularly. Stations that broadcast traffic announcements also transmit a signal indicating that they do. If this signal is detected by your TravelPilot, a TP symbol (TP = Traffic Programme) will appear in the status line of the main radio mode menu. -
Page 60: Tmc (Traffic Message Channel)
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Interrupting a traffic announcement You can cancel the announcement by pressing the TA 4, MEN : und ESC 9 buttons or by tuning into another station. TMC (Traffic Message Channel) TMC stands for Traffic Message Channel and refers to broadcast digital traffic information that can be analysed by the TravelPilot for dynamic navigation. - Page 61 tune into a station manually (for further information read “Tuning into stations manually” later on). The >> option means that automatic seek tuning will be started (for further infor- mation, read “Automatic seek tuning”). Automatic seek tuning To tune into stations automatically, press >>...
-
Page 62: Tuning Into Mw Stations
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Note: This will only work if the RDS function is switched off in the setup menu. Press the << or >> button 2. The frequency changes in 100 kHz steps. Tuning into MW stations You can automatically and manually tune into stations in MW radio mode. -
Page 63: Scan Seek Tuning
Scan seek tuning JUMP Scan seek tuning automatically searches the entire frequency range for receiv- able stations. Each station is played for ten seconds. If you do not stop scan T-STORE SCAN seek tuning yourself, it will stop automatically when it has run through the fre- quency range once. -
Page 64: Tmc Scan
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX TMC Scan TMC Scan only tunes into stations that support the TMC feature. Starting TMC Scan To start a TMC Scan, switch to the radio functions menu by pressing the TU button A and press the softkey assigned to the PAGE 2 menu item. - Page 65 Tune into a station as described in the section entitled “Tuning into a station” and press and hold the softkey assigned to the required memory location until after the confirmation beep is heard. The station is now stored to that memory location. The name and fre- quency appear alongside the softkey in the display.
- Page 66 INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Storing TMC stations automatically - “TMC Store” JUMP The unit can automatically store six TMC stations from the region in the FMC memory. Please note that any stations previously stored in the FMC memory T-STORE SCAN will be overwritten by the TMC Store function.
-
Page 67: Reducing Reception Interference In Fm Mode
Reducing reception interference in FM mode JUMP Neighbouring stations may occasionally cause interference to reception in FM radio mode. This occurs particularly when the stations are close together in the SEARCH >> frequency range. The TravelPilot gives you the option of using the SHARX func- tion to largely keep this kind of interference in check. -
Page 68: Tim - Traffic Information Memory
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX If radiotext is shown in the display, and you want to change stations, for in- stance, press the TU button A or a softkey. The main radio menu appears without radiotext. Switch to another station. - Page 69 Recording traffic information TRAFFIC Whilst the unit is switched on, traffic information is recorded automatically if a traffic information station is received. TIM-INFO If TIM is activated, traffic information will be recorded whilst the unit is switched off. You can choose whether you want traffic information to be recorded for 2 or T-INFO 24 hours.
- Page 70 INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Keep pressing the T button 8 until the required 2H, 24H or OFF option is highlighted. Listening to stored traffic messages The unit can record 14 traffic messages. To listen to the stored traffic messages, press the T button 8.
-
Page 71: Viewing Tmc Messages
You can drive into the car wash. When you switch the TravelPilot on again, you have to re-activate TIM recording standby. Viewing TMC messages The TravelPilot provides you with the option of viewing the traffic messages received via TMC (Traffic Message Channel) in the display. These messages are used by the navigation system for dynamic navigation (for further informa- tion, read the section entitled “Dynamic navigation”... -
Page 72: Cd Mode
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX CD mode You can play audio CDs in the TravelPilot’s internal CD drive. When you are AUDIO-CD playing audio CDs, only NO MAP navigation is possible. 2 3 4 5 6 7 8 Only use audio CDs that bear this logo: 9 10 11 12 13 14 15 During CD playback, the track number and the playing time or just the track... - Page 73 Starting internal CD playback (no CD changer is connected) If an audio CD is inserted and no CD changer is connected, press the CD-C button ?. The unit switches to the main CD menu and CD playback begins. If no audio CD is inserted, a message informing you of this appears in the display.
-
Page 74: Selecting Tracks
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Traffic announcements during CD mode To switch traffic announcement standby (see the section entitled “TA (Traffic Announcement)” in the “Radio mode” chapter) on / off during CD mode, press the TA button 4. The TA symbol is displayed or hidden in the status line of the main CD menu. -
Page 75: Fast Searching
Fast searching If you are listening to a track and you want to play a certain part of it, you can do so with fast search mode. Press the << or >> button 2 during playback. You can hear the track fast forwarding / reversing. Random play (MIX) You can play the tracks on a CD in random order. -
Page 76: Repeating Tracks (Repeat)
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Repeating tracks (REPEAT) To repeat a track, activate the repeat function. Proceed as follows: Select the required track, SCAN PROGRAM switch to the functions menu in CD mode by pressing the CD-C button ? and REPEAT NAME... - Page 77 Entering a name CD NAME Use the right knob/pushbutton ; to move the selection marker to the STONES first letter of the name you wish to enter. The currently highlighted letter is displayed in an enlarged fashion within the magnifier on the right of the display. ABCDEFGHIJKLMNO Press the right knob/pushbutton ;.
-
Page 78: Programming Playlists
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Deleting all names If you want to delete all the CD names from memory, proceed as follows: Open the CD name menu and CLR NAME press the softkey assigned to the CLR ALL menu item. A confirmation request appears. - Page 79 The programme menu opens. If you have not selected any tracks yet, the CLR PRG and RUN items cannot be selected. If this is the case, they will be marked with a lock symbol. Use the << / >> buttons 2 to select the track you want to play first. CLR PRG Press the softkey assigned to the ADD menu item.
-
Page 80: Setup Index
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Deleting individual playlists To delete a playlist if, for instance, you want to programme a new one, run the playlist that you want to delete and press the softkey assigned to CLR PRG. Deleting all playlists in memory If you want to delete all the playlists in memory, press the softkey assigned to CLR ALL. -
Page 81: Cd Changer Mode
CD changer mode You can use the following Blaupunkt CD changers with the TravelPilot: CDC - A08 IDC - A09 Please refer to the installation and connection instructions supplied with your CD changer for information on how to install the CD changer in your vehicle and connect it to the TravelPilot. - Page 82 INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX The functions area in the centre of the display contains the numbers or names of the first five CDs in the changer. In addition, a menu item is displayed so that you can open the second STONES DOORS page of the main CD menu.
-
Page 83: Selecting A Cd
Selecting a CD To select a CD, press the softkey assigned to the CD. If the required CD is not shown in the functions area of the display, open the second page of the main menu. Press the softkey assigned to the CD6-CD10 or CD1-CD5 menu item. The other page of the main menu is opened. -
Page 84: Random Play (Mix)
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Random play (MIX) You can play the tracks on a CD or all the CDs in the changer in random order. Switch to the functions menu by pressing the CD-C button ? and press the softkey assigned to the MIX menu item. -
Page 85: Repeating Tracks Or Cds (Repeat)
Configuring SCAN for one CD or for all the CDs in the magazine The SCAN function provides you with the option of choosing whether only the tracks on the CD you are currently listening to should be scanned. TIME Switch to the setup menu by pressing the MEN button :. Press the softkey assigned to the SCAN menu item until the required SCAN option appears alongside SCAN. -
Page 86: Programming Playlists
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Activating the repeat function for CDs To repeat a CD, you first have to set the repeat function to CD. In the setup menu, press the softkey assigned to RPT until CD appears. The settings are kept for all repeat functions in CD changer mode until the next time you change them. - Page 87 Repeat these steps for all the tracks that you want to include in your playlist. A star is displayed in the main menu alongside the CD number or name to indicate that a playlist has been programmed for this CD. TIP: The programmed playlist remains stored in memory even after you remove the CD.
-
Page 88: Naming Cds
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Deleting all playlists in memory If you want to delete all the playlists in memory, press the softkey assigned to CLR ALL. A confirmation request appears. If you are sure you want to delete all the programmed playlists, select YES with the right knob/pushbutton ;. - Page 89 The currently highlighted letter is displayed in an enlarged fashion within CD NAME the magnifier on the right of the display. Press the right knob/pushbutton ;. DOORS The letter is entered into the name line at the top. Continue in this manner with the remaining letters of the name. ABCDEFGHIJKLMNO Once you have finished entering the name, PQRSTUVWXYZ -/.
-
Page 90: Switching The Playing Time Display On/Off
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Deleting all names If you want to delete all the CD names from memory, proceed as follows: Open the CD name menu and CLR NAME press the softkey assigned to CLR ALL. A confirmation request appears. -
Page 91: Activating / Deactivating Traffic Announcements (Cd Changer)
Activating / deactivating traffic announcements (CD changer) To switch traffic announcement standby (see “TA (Traffic Announcement)” in TIME ON TRK the “Radio mode” chapter) on / off during CD changer mode, Press the TA button 4. SCAN The TA symbol is displayed or hidden in the status line of the main CD menu. -
Page 92: Steering Wheel Remote Control
INTRODUCTION NAVIGATION RADIO MODE CD MODE REMOTE CONTROL CD CHANGER SETUP INDEX Steering wheel remote control The RC 10 steering wheel remote control allows you to safely and conveniently access some of the TravelPilot’s primary functions from your steering wheel. and OK buttons on the remote control have the same functions as the right knob/pushbutton. - Page 93 Muting You can mute the unit using the remote control. Press the button. Cancelling mute If you want to cancel mute, press the button again or press the V+ or V- button. INTRODUCTION NAVIGATION RADIO MODE CD MODE REMOTE CONTROL CD CHANGER SETUP INDEX...
-
Page 94: Setup - Basic Settings
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Setup - basic settings SETTINGS Setup mode allows you to adjust the TravelPilot’s basic functions to suit your DISPLAY needs. VOLUME You can change the following device functions: CLOCK • DISPLAY - Changing the display characteristics •... -
Page 95: Setting The Day / Night Changeover, Viewing Angle And Display Brightness
Setting the day / night changeover, viewing angle and dis- play brightness You can deactivate the automatic changeover to night-time display and adjust the display brightness for the night and day displays in the display setup. You can also change the display viewing angle here. Automatic changeover to night display If you want to deactivate the automatic changeover to the night-time display because, for instance, you always drive with your headlights on,... -
Page 96: Configuring Power-On / Telephone / Navigation / Traffic Information Announce- Ment Volume And Gala Settings
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Adjusting the display brightness DISPLAY You can adjust the display brightness separately for the day and night display. If you want to adjust the display brightness, ANGLE use the right knob/pushbutton ; to select the DAY or NIGHT item that BRIGHTNESS you require and repeat the steps described under “Adjusting the viewing angle”. - Page 97 The power-on volume is a limiting value. This means that if the volume when VOLUME you switch the unit on is lower than the configured power-on volume, the volume level that was last set will be applied. If the volume when you switch the unit on POWER-ON is higher than the configured power-on volume, the volume will be reduced to TA-MIN...
-
Page 98: Setting The Clock
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Setting the clock CLOCK In the CLOCK setup menu, you can activate / deactivate summer time, set the SETTINGS time format (12/24 hour), and set the time zone in relation to the standard time (GMT). - Page 99 Setting the time zone Highlight the CLOCK menu item in the setup menu. Select SETTINGS. Highlight the TIME ZONE menu item. Adjust the time difference using the right knob/pushbutton ;. The deviation from GMT for Germany is +1 hour. Activating summer time When you activate / deactivate summer time, the system time is adjusted auto- matically.
-
Page 100: Selecting The Language
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Adjust the minutes using the right knob/pushbutton ;. Press the right knob/pushbutton ;. Selecting the language You can set the language for the displays and navigation. There are various languages available depending on the navigation CD. Metric settings (distances in kilometres and metres) and imperial settings (distances in miles and yards) are available for the English language. -
Page 101: Calibrating The Device
Calibrating the device INSTALLATION The INSTALLATION setup menu contains all the necessary items for preparing SYSTEM TEST the TravelPilot for operation once it has been installed. CALIBRATION Calibrating after installation (new installation) If you installed the unit yourself, the system has to be calibrated to suit your GPS STATUS vehicle. - Page 102 INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Note: No navigation is possible during the first 25% of the calibra- tion procedure after NEW INSTALL is selected. The route that you have to drive along depends on various factors such as the quality of GPS reception and the route itself.
-
Page 103: Activating / Deactivating The Code Feature
Use the right knob/pushbutton ; to select START. Carry out the steps as instructed by the system. Carrying out the system test You have the option of carrying out a system test. The system checks the GPS antenna and whether the reversing signal and the vehicle ignition are correctly connected to the system. -
Page 104: Resetting To The Factory Defaults
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Resetting to the factory defaults SETTINGS You can reset the TravelPilot to its default settings. This affects all the settings LANGUAGE for the navigation system and the audio sources. INSTALL Select DEFAULT SET. -
Page 105: Setting Seek Tuning Sensitivity
Setting seek tuning sensitivity SETTINGS You have the option of setting the seek tuning stop sensitivity for automatic seek LANGUAGE tuning mode. The default setting is BEST. Use the right knob/pushbutton ; to select the FM-SEEK menu item. INSTALL Keep pressing the right knob/pushbutton ; until the required option is SAFETY displayed inversely alongside FM-SEEK. -
Page 106: Factory Default Settings
INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Factory default settings The following table contains the factory default settings for the TravelPilot. Setting Default setting Display Day / night Viewing angle Brightness day Brightness night Special effects Volume Power-on TA-Min Nav-Min... - Page 107 Code feature Radio RDS-REG SHARX Radiotext Seek tuning sensitivity Best CD audio Playing time display CD changer Playing time display Scan Repeat Track Navigation Route Fast Motorway With Ferry With Toll With Symbol Voice output Last 10 Time info Arrival time INTRODUCTION NAVIGATION RADIO MODE...
- Page 108 INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Sound Bass Treble Balance 9 (middle) Fader 9 (middle) Loudness TIM standby 24 h...
-
Page 109: Index
Index Entering a destination ......17 LAST 10 option ........53 Entering a tour destination ....36 Loudness ..........14 Excluding a route section from the route list ........47 Alternative frequency ......57 Manually setting your position ....54 MIX .......... - Page 110 INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX Radio mode ........... 56 Saving a destination in memory .... 42 TA ............59 Radiotext ..........67 SCAN ..........75, 84 TIM - Traffic Information Memory ..68 Random play ......... 75 Scan seek tuning ........
- Page 111 01-324 8756 Poland (PL) 0800-118922 022-8771260 Turkey (TR) 0212-3350677 0212-3460040 (USA) 800-2662528 708-6817188 Brasil (Mercosur) (BR) +55-19 3745 2769 +55-19 3745 2773 Malaysia (Asia Pacific) (MAL) +604-6382 474 +604-6413 640 Blaupunkt GmbH 07/01 Kn CM/PKD 8 622 402 508 A (GB/S/DK)