Calling A Destination From The Memory; Destination Guidance - Blaupunkt TravelPilot Rome NAV55E Operating And Installation Instructions

Operating the navigation system
The three memories "Last 10",
"Destinations" or "Waypoints" ap-
pear.
➜ Mark and confi rm the memory
from which you want to delete
all destinations.
The confirmation
"Delete memory completely?" is
displayed.
➜ Mark and confi rm "Yes" to delete
all destinations from the mem-
ory.
To rename saved destinations:
In the "Edit" menu, mark and con-
➜
fi rm the "Rename destn." menu
item.
Delete destn.
Clear memory
The list of destinations saved in
the "Destinations" memory is dis-
played.
Mark and confi rm the destination
➜
to be renamed.
The text input appears.
➜ Enter the desired name in the
text input (see p. 52).
The destination appears in the
list under its new name.
Note:
You can only rename desti-
nations that are saved in the
"Destinations" memory.
62
Calling a destination from
the memory
Instead of entering a new destina-
tion, you can call a saved destina-
tion as follows:
➜
dialogue
➜
Modify
The list of destinations saved in the
Rename destn.
selected memory is displayed.
➜

Destination guidance

After entering a destination, the
route is calculated (see p. 63).
Next, the destination guidance au-
tomatically starts with visual turn-
by-turn directions (see p. 64) and
with voice-prompted turn-by-turn
directions (see p. 65).
Mark and confi rm the "Memory"
menu in the navigation display.
The "Memory" menu appears.
Last 10
Destn.
Waypoint
Mark and confi rm the memory
from which you want to call a des-
tination ("Last 10", "Destinations"
or "Waypoints").
Mark and confi rm the desired
destination.
The destination guidance starts
(see below).
Memory
Add
Modify
Set waypoint