Table of Contents
Advertisement
A Guide to TracVision S3
Default Transponder Values
2-22
This information has to be entered for each of the four
transponder categories:
• vertical high
• horizontal high
TracVision S3 requires that the data fields for all four transponder
categories be provided. If the selected satellite does not have
information for one or more of the transponder categories,
default information should be entered in the fields as follows:
Table 2-6
Transponder Data
Frequency
Symbol Rate
FEC Code
Network ID
Polarity and Band
After entering this information, it is necessary to save these
settings. To do so, type:
@SAVE,A
@DEBUGOFF
After completing this process,
power or typing
One of your user-defined satellite options has now been added to
the TracVision S3 satellite library. This option will now be
available the next time the SATINSTALL command is given.
• vertical low
• horizontal low
Default Value
00000
27500
the same value as provided for those
transponders with data
0x0000
whichever combinations are not
already provided
(or
@SAVE,B
if this data is for Satellite 2)
restart the system by either cycling
ZAP
in the maintenance screen.
Advertisement
Table of Contents
Troubleshooting
