Auxiliary Convection Air Lever
The auxiliary convection air lever is locked from the fac-
tory. If you are going to use this function for air move-
ment you must remove the lock.
After removing the fascia, remove the one screw and
plate to allow the handle to be moved in the full motion
right to left. See Figure 3.14.
Discard the plate and screw. Replace fascia.
The auxiliary convection lever is located underneath
the front lower panel as shown in Figure 3.14.
Convection Lock Bracket
8-32 Screw
Figure 3.14 Auxiliary Convection Air Lever
19
Quadra-Fire • 7100 FP • 433-3610 Installation Manual • Rev G • 5/27/14