Table of Contents
Advertisement
Outputting
Setting the Output-start Location
You can set the output-start location at any location you prefer. (You can output if you do not set this.) Note,
however, that this setting must be made for each individual page.
Procedure
Open the front cover.
2
Use
start location.
Only cutting carriage moves.
Start location
When the location is set, press
W1100mm
B
Note, however, that the left and right positions are not restored to their defaults for test patterns.
If you're using the media take-up unit, never adjust by pressing
media with undue force, resulting in an error or malfunction.
62
to move the center of the blade with the output-
.
remains steadily lighted and when the screen displays the char-
acter "B" together with the output-possible width at the location, setting
is completed.
. Doing so may pull the
Advertisement
Table of Contents
