Printer Does Not Start Up; The Printer Unit Doesn't Run - Roland XR-640 User Manual

Printer Does Not Start Up!

The Printer Unit Doesn't Run

Is the power switched on?
Switch on the printer's main power, then press the sub power switch and make sure the sub power switch
lights up.
 P. 38, "Switch On!"
Is illuminated?
Output is not performed when
Pull back the loading lever, close the front cover, and press
 P. 67, "Getting Ready to Receive Data from a Computer""
Is the front cover open?
Close front cover, cover L and cover R.
Is the top menu displayed?
Top menu
W 1200 m
If the top menu isn't displayed, output doesn't start even when data is sent from the computer. To go to the
top menu, press
 P. 67, "Getting Ready to Receive Data from a Computer"
Is illuminated?
When
ting resumes.
 P. 69, "Pausing and Canceling Output"
Has ink run out?
6
When printing data is sent while the screen shown in the figure is displayed, a message appears and a warn-
ing beep sounds. At the same time, operation pauses. When the ink cartridge is replaced with a new one,
printing or cutting starts.
 P. 75, "How to Replace Ink Cartridges"
 P. 146, "Determining What Happens When Ink Runs Out"
160
is not illuminated.
, then press
lights up, operation is paused. To resume, press
.
.
.
goes dark and output-