Pausing And Canceling Output; Cutting Off The Media - Roland XR-640 User Manual

Pausing and Canceling Output

You can pause and cancel printing before it finishes. We do not recommend resuming printing because hori-
zontal stripes are produced at the place where output stopped.
Procedure

Press before output finishes.
This pauses printing operation.
Press again to resume printing.
To cancel the output, go the next Procedure without pressing

TO CANCEL, HOLD
DOWN SETUP KEY

Stop sending the output data from the computer.

Cutting Off the Media

Procedure

Close the front cover.

Make sure

Hold down
REMOVE
MEDIA CLAMPS
Blade protector
When the screen shown in the figure appears, hold down
for one second or longer.
This cancels printing operation.
lights up.
for one second or longer.
When the media clamps are attached, the screen shown in the figure appears.
Open the front cover, remove the right and left media clamps, and then press
.
The media is cut off here.
Outputting
.
2
69