Table of Contents
Advertisement
Description
You perform this when printing followed immediately by cutting yields positioning for printing and cutting
that is slightly misaligned. You print alignment marks, perform detection of the printed marks, and correct the
discrepancy. Subtle misalignment between the printing and cutting positions may occur due to the thickness
of the media or the head height. We recommend making correction to match the media you're using.
Default Setting
[F] (correction value of media feed direction): 0.00mm
[S] (correction value of head movement direction): 0.00mm
Prioritize The Cuttings Settings of This Machine to The Settings of a Computer Side in Software RIP
Procedure
Hold down
CUTTING MENU
CUTTING PRIOR
CUTTING PRIOR
COMMAND
MENU
Press
Description
You can also make the settings for the cutting conditions using the software RIP. By default, the settings made
with the software RIP take priority. To make the cutting conditions set on the machine take priority, either turn
off the settings of the software RIP or make the setting described above.
Default Setting
[CUTTING PRIOR]: COMMAND
and press
.
Press
Press
Press
Press
in this order to go back to the original screen.
Fully Utilizing Cutting Function
twice to display the left figure.
.
to select "MENU."
to enable the setting.
4
127
Advertisement
Table of Contents
