Table of Contents
Advertisement
Accommodating to the Types and Condition of Media
Description
You use this when ink dries poorly even when the media heating system is used. You can also make this set-
ting on the software RIP. When you have made the setting on the software RIP , the setting is used and the
printer's setting is ignored.
Default Setting
[SCAN INTERVAL]: OFF
Using the Media Easy to be Winkled/Hard to be Fed
Procedure
Press
MENU
SUB MENU
4
SUB MENU
VACUUM POWER
VACUUM POWER
AUTO
Press
Description
The platen uses suction to grip the media and keep it stable. The suction force can be adjusted corresponding
to the mature and condition of the media.
You can also make this setting on the software RIP. When you have made the setting on the software RIP, the
RIP's setting is used and the printer's setting is ignored.
Default Setting
[VACUUM POWER]: AUTO
116
.
Press
on the left.
Press
Press
Press
Press
90%
0 to 100%
A larger value produces a larger suction force. For the media easy to
be loose due to warping or winkling, increase of the suction force
may help correct the problem. When the media is flimsy and cannot
move smoothly, reduction of the suction force may correct such the
problem.
AUTO
The suction force is automatically adjusted to the optimal level for
the media width.
Press
in this order to go back to the original screen.
several times to display the screen shown
.
twice.
.
to select a value.
to enable the setting.
Advertisement
Table of Contents
