Maintenance That Should Be Performed More Than Once A Month; When Manual-Cleaning Becomes Necessary - Roland XR-640 User Manual

Maintenance that Should Be Performed More Than Once a Month

When Manual-Cleaning Becomes Necessary

Perform the manual cleaning more than once a month.
To keep the stable output condition at all times, perform the manual cleaning more than once a month. The
manual cleaning takes approximately 10 minutes.
The manual cleaning is recommended when the following symptoms occur.
It is recommended to perform the manual cleaning when any of the symptoms given below occurs and it
cannot be solved by the automatic cleaning functions such as the normal cleaning.
For your information, replacement of the wiper or felt wiper is also effective to improve the symptoms.
 P. 89, "Replacing the Wiper"
 P. 92, "Replacing the Felt Wiper"
3
Dot drop-out or deflection
Flaws in the dot pattern
are caused by dust on the
print heads.
 When the cleaning stick and cleaning liquid for the manual cleaning runs out, place an order for them with
your authorized Roland DG Corp. dealer.
 The print heads are components that wear out. Periodic replacement is required, with the frequency of
replacement depending on use. Purchase them from your authorized Roland DG Corp. dealer.
82
Ink drips
Ink that has adhered to
dirty or dusty print heads
drips onto the media.
Dragging dirt
When dirt or dust accumu-
lates on the print heads it
can interfere with image
quality.