Autofocus; Af Assist Lamp - Leica X2 Instructions Manual

AUToMATIC dISTANCE SETTING / AUToFoCUS
With the AF mode set, focusing is performed automatically when the shutter
release button is pressed to the first pressure point (1.8), i.e. the distance is
measured, set, and locked (see also p. 147).
- the frame color changes to green,
- up to 9 green rectangles appear in the case of 11 area metering
(see p.123),
- the green focus status LED (1.19) lights up, and
- an acoustic signal is generated (if selected, see p. 123).
Notes:
– if the distance to the targeted subject is outside the available range,
– the frame color changes to red,
– in the case of 11 area metering, the display changes to a single red
frame, and
– the focus status LED (1.19) flashes.
Important:
The shutter release button (1.8) is not locked, regardless of whether a sub-
ject is correctly focused or not.

AF ASSIST LAMp

into low light conditions. With the function activated, the lamp lights up
automatically in such situations whenever the shutter release button (1.8) is
pressed.
In the menu, select AF-Assist Lamp
setting.
Note:
conditions, AF operation is not possible for distances beyond this limit.
121