The Histogram - Leica X2 Instructions Manual

THE HISToGrAM

This form of representation allows – alongside the image itself - an additional,
taking the picture. The histogram is particularly suitable for manual setting of
For record mode, select Rec. Histogram (3.20) in the menu, and in the sub-
menu the desired setting.
Note:
posure, as the flash is fired after the display.
For review mode, select Play Histogram (3.21) in the menu, and in the sub-
menu the desired setting. Select an option with clipping to have too bright or
dark parts of the picture marked.
Notes:
reduced or enlarged photographs (see p. 143).
the picture was taken.
EXpoSUrE CoNTroL
-
adjust the camera perfectly to your preferred working method or the relevant
subject.
Both the four modes and manual settings of the shutter speed and the aperture
Shutter speeds from 30s to
Both controls have manual setting ranges with click-stop positions – the speed
P, T, A;
position for automatic operation.
Shutter speeds of 1s and slower are set by first turning the shutter speed dial to
the 1+ - position, and then selecting the speed with the setting ring (1.22).
Note:
-
Depending on the prevailing light conditions, the brightness of the screen
posures on dark subjects, the monitor image appears considerably darker than
127
1
2000
(2.1.15) appears additionally.
A -
-