Point Mode; Spot Mode - Leica X2 Instructions Manual

11 ArEA ModE
Focusing is based on the areas indicated by the 11 AF frames. They are
focusing security for snapshot type photography. Sharpness is registered in
all 11 areas, but focusing is automatically determined by the closest objects
registered.
In addition, you can concentrate focusing to any of the four sides of the
image by reducing the number of areas used and selecting respective
groups.
Press the DELETE/FOCUS button (1.15) for ≥1 second.
only the 9 frames constituting the central group have red outlines. Red
triangles on all sides indicate the possible settings.
Besides the central group, you can select groups of either the top or bottom
three or the four left or right AF areas. Use the direction buttons to select
the desired AF frame group. You can return to the central 9 frame group at
INFO
any time with the button (1.12). Press either the shutter release button
DELETE/FOCUS
(1.8) or the

SpoT ModE

Focusing is based on the area indicated by a small AF frame in the center of
smallest subject details. For portraits, e.g., it is normally recommended that
the eyes are rendered totally sharp.
In addition, you can move the AF-frame to anywhere on the screen, e.g. for
easier composition in the case of off-center subjects.
Press the DELETE/FOCUS button (1.15) for ≥1 second.
on all sides of the frame indicate the possible movement directions. To indi-
cate the movement limits, the respective triangles disappear near the edges.
Use the direction buttons to move the AF frame to the desired position.
You can return the frame to the central position at any time with the
ton (1.12). Press either the shutter release button (1.8) or the
123
INFO
but-
DELETE/FOCUS