Leica X2 Instructions Manual page 59

Hide thumbs Also See for X2:
Table of Contents

Advertisement

Note:
When using faster shutter speeds, in terms of the image there is hardly any dif-
ference, or only for rapid movements between the two firing moments.
FLASH EXpoSUrE CoMpENSATIoN
outside in the evening, to lighten the face of a person in the foreground while
retaining the lighting atmosphere.
ton (1.23) three times.
2. Select the desired compensation value with the left and right direction
available.
3. Confirm the setting by pressing either the shutter release button (1.8) or the
MENU/SET
button (1.25).
Notes:
influence the flash range more or less considerably: A plus compensation
reduces the range, a minus compensation increases it.
EV
They scroll through in an endless loop and can therefore be selected by re-
peatedly pressing the button.
USING EXTErNAL FLASH UNITS
The ISO flash shoe (1.11) of the Leica X2 also allows the use of more powerful,
-
the Leica SF 24D (see p. 153).
tion (
modes without pre-flash (
EV+/- direction but-
However, when the flash unit is removed, the camera is reset to the originally
set mode.
On the Leica SF 24D, the mode
control by the camera. When set to
1
EV increments are
3
must be adjusted to the aperture and distance values specified by the camera
by setting a corresponding reduced power output level.
Notes:
137
i.e. after any number of shots and even if the camera is switched off.
) are set, they are changed to the otherwise same
TTL/GNC
era may result.
sible.
±0 (see step 2.),
) and displayed accordingly.
should be set to allow automatic
A
, subjects with above or below average
M
-
-
-

Advertisement

Table of Contents
loading

Table of Contents