THE MoST IMporTANT SETTINGS / CoNTroLS
SwITCHING THE CAMErA oN / oFF /
SELECTING THE EXpoSUrE FrEQUENCY
The Leica X2 is turned on and off using the main switch (1.7). This is done by
turning it from
OFF
to the desired mode, i.e. to
ous shooting).
Note:
If you forget to remove the lens cap before switching the camera on, a respec-
tive message will appear. The same applies if the camera is activated from
stand-by mode (see p. 113) with the cap on.
S
(single shot), or
C
(continu-
1.7
When the main switch is set to
sequences. Frequencies of either 3fps (Low) or 5fps (High) are available.
In the menu, select Continuous (3.5), and in the submenu the desired setting.
Notes:
activated, only one picture is taken.
C
mode and the self timer (see p. 138) are being used in conjunction,
1
1
s or faster (
s with 3fps).
4
and Auto Review
104
C
, the Leica X2 produces continuous picture
PLAY