Miscellaneous; Transferring Data To A Computer; Connecting And Transferring Data With; Miscellaneous Transferring Data To A Computer - Leica X2 Instructions Manual

MISCELLANEoUS

TrANSFErrING dATA To A CoMpUTEr

The Leica X2 is compatible with the following operating systems:
® ®
Microsoft : Windows
® ® ®
Apple Macintosh : Mac OS X (10.4) and higher
The Leica X2 is equipped with a USB 2.0 High Speed interface for transferring
data to a computer. This allows fast data transfer to computers with the same
kind of interface. The computer used must have either a USB port (for direct
(including UHS I standard types).
CoNNECTING ANd TrANSFErrING dATA wITH THE CAMErA AS
AN EXTErNAL drIvE
with windows operating systems:
If the Leica X2 is connected to the computer using a USB cable, the operating
with Mac operating systems:
If the Leica X2 is connected to the computer using a USB cable, the memory
card used appears as a storage medium on the desktop. Use the Finder to
transfer the picture data to your computer and save it.
® ®
Important:
nection may not under any circumstances be broken by removing the USB
memory card may even be irreparably damaged.
a lack of battery power while data is being transferred from the camera to
son the battery must never be removed from the camera while the connec-
tion is active. If the battery capacity runs short during data transfer, the
In this case, stop the data transfer, switch off the Leica X2 (see p. 104) and
charge the battery (see p. 100).
-
149
-
-
INFO