EXpoSUrE CoMpENSATIoN
large areas of snow or, in the opposite case, a black steam locomotive filling
compensation than to use metering memory lock every time (see previous
section).
1. To set a compensation, press the upper
2. Select the desired compensation value with the left and right direction
available.
respondingly darker or brighter.
3. Confirm the setting by pressing either the shutter release button (1.8) or the
MENU/SET
button (1.25).
EV+/-
direction button (1.23) once.
1
EV increments are
3
Notes:
mode (see p. 119)
EV+/-
They scroll through in an endless loop and can therefore be selected by re-
peatedly pressing the button.
after any number of shots and even if the camera is switched off.
-
131
±0 (see step 2.), i.e.