Incoming Call - NEC DT730G (CG): ITL-12CG-3 User Manual

1.
• Safely Remove USB Device
The following explains how to remove a connected
USB device from the terminal.
Note:
Be sure to remove the USB device when the terminal is
connected to the system.
Note:
Ensure any connected USB device is removed before
powering off the terminal. This may cause failure of the
USB device.
When overcurrent of the USB device is detected, power
supply to the USB port will be suspended. To restart the
TIP
USB device power supply, remove the USB device and
reboot the terminal.
When using Power Hub (When AC adapter is not used),
TIP
plug and unplug the LAN cable connected to the
terminal.
When using AC adapter, plug and unplug the AC
adapter after disconnecting the LAN cable connected to
TIP
the terminal. Also, when you connecting/disconnecting
the LAN cable, be sure not to confuse the cable for LAN
port with the cable for PC port.
STEP 1:
Display the Menu screen, select Setting.
STEP 2: 1
Select User Setting.
Select an item by one of the following operations.
• Highlight an item by using
or OK.
1
• Press .
STEP 3:
, and press ,
66
[Setting]
1 User Setting
2
Download
3 Data Backup/Restore

Menu
6
Select Peripherals.
Select an item by one of the following operations.
• Highlight an item by using
or OK.
6
• Press .
[User Setting]
1

Incoming Call

2 Talk
Display
3
4 Change Password
5 Security
6
Peripherals
7 Usability
 Back
1/1
OK
, and press ,
1/1
OK