NEC DT730G (CG): ITL-12CG-3 User Manual page 149

W P
EB
Web Programming allows you to configure the
terminal settings of DT730G from the PC. An web
browser (Internet Explorer, etc.) is used to access
Web Programming. It is not necessary to install
any special application software onto the PC.
Note:
The DT730G and Web Programming PC need to be
connected to the same network. When downloading the
files for Music on Hold, Ringer Tone and Directory to the
DT730G, FTP (TFTP server) are required on the network.
For details on the FTP service, contact to the System
Administrator.
Note:
Terminal settings through Web Programming is available
while DT730G is logged into the system.
PC Requirements for Web Programming
Items
Operating System
CPU
Memory
Browser
ITL-12CG-3
Monitor
ITL-12DG-3
Others
ROGRAMMING
Operating Conditions
 
Microsoft Windows XP/Vista/

Windows 7
Comply with conditions for use of

Microsoft Windows or Microsoft
Internet Explorer.

Microsoft Internet Explorer 6.0 or
later
4.3 inch Color (16777216 colors)
TFT
3.8 inch Gray Scale (8 gradations)
FSTN
Mouse, LAN connection port
(RJ-45)
To Login
Follow the steps below to open the Web
Programming.
STEP 1:
Start up
STEP 2:
Enter IP address of the target DT730G on
the address toolbar and press Enter key.
STEP 3:
The Web Programming Login screen is
displayed. Enter a user name (type USER)
and a password (Note 1), then click the
OK

- 141 -
Internet browser
on the PC.
button.